search

Assemble the hardware

Assemble the node's hardware

Make sure you got everything from the Hardware list. Then assemble it as follow:

  1. Insert the microSD card into the Raspberry Pi.

  2. Connect the SSD to the Raspberry Pi via a USB 3.0 port.

  3. Use an RJ45 cable to connect the Raspberry Pi to your modem/router.

  4. Plug in the Raspberry Pi’s power supply.

circle-exclamation

Once the Pi boots, wait for 10 minutes for Umbrel OS to install.

circle-info

Umbrel will automatically detect the SSD and configure it as storage.

PreviousFlash Umbrel OSNextSetup Umbrel OS

Last updated

Was this helpful?